ANALOG/DIGITAL CONVERTER & CAMERA SET-UPS
WIRELESS OR HARDWIRED TO ROUTER
WIRELESS OR HARDWIRED TO ROUTER
ANALOG/DIGITAL CONVERTER & CAMERA SET-UP WITH WIRELESS PLC ADAPTERS
SET-UP IS SIMPLE WITH (6) EASY "PLUG & PLAY" STEPS
STEP 1
Use our "Quick & Easy Set-Up Guide" found under User Manuals located in FAQ? System Info.
FOLLOW THE SIMPLE STEPS TO SET UP, REGISTER AND DISCOVER YOUR GATEWAY CONTROLLER
IT WILL ALSO GUIDE YOU ON REMOTE USAGE OF YOUR MyVIRTUAL NETWORK SYSTEM
IT WILL ALSO GUIDE YOU ON REMOTE USAGE OF YOUR MyVIRTUAL NETWORK SYSTEM
STEP 2
Mount your Night Vision Camera in the area you wish to monitor - Now, plug the Power/Video Extension Cable to the back of the camera. (See image below).
STEP 3
Plug the other end of the Power/Video Extension Cable into the Analog/Digital Converter
& Camera Power Supply.
& Camera Power Supply.
STEP 4
Plug the Wireless PLC Adapter (white) into the back of Analog/Digital Converter with the Ethernet Cable provided.
STEP 5
Plug another Wireless PLC Adapter (white) into your Router with the Ethernet Cable provided,
only (1) Adapter is required in the Router for all of your cameras to connect wirelessly.
only (1) Adapter is required in the Router for all of your cameras to connect wirelessly.
STEP 6
Once connected go to www.myvirtualnet.com click the Log-in located at the upper right hand corner of the screen, enter User ID and Password and start the discovery process of your Analog/Digital Converter to your system (then - press the reset button on your converter). Set-Up is completed!
ANALOG/DIGITAL CONVERTER & CAMERA EASY HARDWIRE TO ROUTER INSTALLATION
SET-UP IS SIMPLE WITH (5) EASY "PLUG & PLAY" STEPS
STEP 1
Use our "Quick & Easy Set-Up Guide" found under User Manuals located in FAQ? System Info.
FOLLOW THE SIMPLE STEPS TO SET UP, REGISTER AND DISCOVER YOUR GATEWAY CONTROLLER
IT WILL ALSO GUIDE YOU ON REMOTE USAGE OF YOUR MyVIRTUAL NETWORK SYSTEM
IT WILL ALSO GUIDE YOU ON REMOTE USAGE OF YOUR MyVIRTUAL NETWORK SYSTEM
STEP 2
Mount your Night Vision Camera in the area you wish to monitor - Now, plug the Power/Video Extension Cable to the back of the camera. (See image below).
STEP 3
Plug the other end of the Power/Video Extension Cable into the Analog/Digital Converter
& Camera Power Supply.
& Camera Power Supply.
STEP 4
Plug an Ethernet Cable into the back of the Analog/Digital Converter and the other end into your Router.
You can use a Hub or Switch to provide more ports in your Router for additional cameras if required.
You can use a Hub or Switch to provide more ports in your Router for additional cameras if required.
STEP 5
Once connected go to www.myvirtualnet.com click the Log-in located at the upper right hand corner of the screen, enter User ID and Password and start the discovery process of your Analog/Digital Converter to your system (then - press the reset button on your converter). Set-Up is completed!
